Tel: 01633 - 256067
Part Number | Model | Description | Picture |
---|---|---|---|
SWP2458 | 1.2, 1.3D, 1.4, 1.6 16v, 1.9D | Front stabiliser link bar L&R | |
SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6026 | 1.2, 1.3d, 1.4 | Rear axle bush | |
SWP2130K | 1.8d M18 x 1.5 Pitch | Sump plug & washer | |
SWP6749 | 1.2, 1.3D Multijet, 1.4, 1.416v, 1.4 T Jet | Front anti roll bar bush 19mm | |
SWP6716B | 1.3D Multijet, 1.4 | Front top strut bearing L&R | |
SWP6719 | 1.3D Multijet, 1.4 | Front top strut mounting LH | |
SWP6719K | 1.3D Multijet, 1.4 | Front top strut mounting & bearing kit LH | |
SWP6720 | 1.3D Multijet, 1.4 | Front top strut mounting RH | |
SWP6720K | 1.3D Multijet, 1.4 | Front top strut mounting & bearing kit RH | |
SWP436B/N | 1.3D Multijet, 1.4 | Pinch bolt & for front wishbone Will fit the following ball joint / wishbones: FCA6557 / FCA6558 FBJ5526 |
|
SWP6808 | 1.3D Multijet, 1.4 Will not fit vehicles with climate control [Auto/Digital air con] |
Heater blower resistor wiring harness: As: 95508692 |