Part Number |
Model |
Description |
Picture |
SWP2462 |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Front stabiliser link bar L&R |
|
SWP2533 |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Rear stabiliser link bar L&R |
|
SWP6731 |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Front top strut bearing L&R |
|
SWP6731M |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Front top strut mounting L&R |
|
SWP6731K |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Front top strut mounting & bearing L&R |
|
SWP428K |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Mass flywheel bolt kit |
|
SWP6204 |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Twin outlet washer pump. [Parallel pins, oval socket] |
|
SWP6712 |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Wiring harness to suit SWP6204 washer pump |
|
SWP6352 |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Single outlet washer pump with wiring harness |
|
SWP6673K |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Rear suspension arm bush kit
2 x kits needed per vehicle
|
|
SWP6896 |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Rear lower suspension arm As: FCA7155 |
|
SWP439B/N |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Rear lower suspension arm Camber bolt & nut
As: 1117876 |
|
SWP6674LH |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Rear trailing arm T Bush & Bracket LEFT HAND |
|
SWP6674RH |
1.6TI, 2.0, 2.0 FLEXIFUEL, 2.3, 2.5, 1.8TDCI, 2.0TDCI, 2.2 TDCI |
Rear trailing arm T Bush & Bracket RIGHT HAND |
|
We don’t sell this arm: We are just showing you where SWP6674LH & SWP6674RH is located |
We don’t sell this arm: We are just showing you where SWP6674LH & SWP6674RH is located |
Click on picture to enlarge |
|
SWP5958 |
Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle |
Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe
|
|
SWP6345 |
Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle |
Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
SWP6346 |
Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle |
Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
SWP6282T |
1.8TDCi |
Top thermostat housing water outlet connection |
|
SWP6282B |
1.8TDCi |
Bottom thermostat housing water outlet connection & Lower thermostat seal |
|
SWP6726 |
1.6Ti |
Driveshaft seal |
|
SWP6746 |
1.6 ZETEC 19-2-07→ 2.0 DURATEC 19-2-07→ 2.3 DOHC EFi 3-9-07→
As: 1135010 |
Oil filler cap |
|
SWP6748 |
Various models: Please check against photograph |
Under body heat shield [exhaust to floor] & noise insulations on bulk head [30mm OD] |
|