Tel: 01633 - 256067
Part Number | Model | Description | Picture |
---|---|---|---|
QSJ880 | All models | Front track control arm LH | |
QSJ879 | All models | Front track control arm RH | |
QSK220 | All models | Front track control arm, outer bush | |
217HD | All models | Front track control arm, outer bush kit Heavy duty | |
SSCBK | All models | Steering column bush kit | |
EM680 | All models | Gearbox mounting | |
SWP95 | All models | Rear axle to body mounting | |
SWP5880 | All models | Front top strut mounting | |
SWP222 | All models | Front top strut mounting bearing | |
SWP5881 | All models | Front anti roll bar bush 20mm | |
DC22K | All models | Sump plug & washer | |
CPR4 | Please measure old one & check colour | Clutch ratchet & pawl repair kit 45mm radius | |
CPR5 | Please measure old one & check colour | Clutch ratchet & pawl repair kit 50mm radius | |
CPR6 | Please measure old one & check colour | Clutch ratchet & pawl repair kit 55mm radius | |
SWP112 | All models | Brake calliper guide kit. [Eliminates brake shudder] | |
DC17 | OHC engine | Oil filler cap | |
SWP2183 | 1.8 Diesel | Oil filler cap | |
DC48 | 2.0 DOHC | Oil filler cap | |
SWP1113 | OHC engine | Thermostat housing With overflow pipe | |
DC14 | 1800 CVH Only | Thermostat gasket | |
2000Guibo | 2.0 | Prop shaft GUIBO coupling with bonded, Non removable doughnut | |
GDC | 2.0 | Prop shaft doughnut coupling | |
JURID | MT75 gearbox | Prop shaft doughnut coupling | |
FCBR | All models | Prop shaft centre bearing insulator rubber | |
FCB | All models | Prop shaft centre bearing | |
BRGF2 | All models | Prop shaft centre bearing with shrouds | |
SWP199 | All models | Prop shaft centre bearing, rubber & carrier Complete. | |
SWP47 | 1.8td | Diesel stop solenoid For Delphi / Lucas equipment | |
SWP507 | All models | Emission control valve filter | |
SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |