Tel: 01633 - 256067
Part Number | Model | Description | Picture |
---|---|---|---|
SWP2543 | 1.5DCi, 1.6, 2.0DCi | Front stabiliser link bar LH | |
SWP2544 | 1.5DCi, 1.6, 2.0DCi | Front stabiliser link bar RH | |
SWP2613 | 1.2, 1.5DCi, 1.6DCi, 1.6DCi 4x4 2013→ |
Front stabiliser link bar LH & RH | |
SWP2608 | 1.5DCi, 1.6, 2.0DCi | Rear stabiliser link bar LH | |
SWP2609 | 1.5DCi, 1.6, 2.0DCi | Rear stabiliser link bar RH | |
SWP6804 | 1.5DCi, 1.6, 2.0DCi | Rear trailing arm bush kit | |
SWP6805K | 1.5DCi, 1.6, 2.0DCi | Front top strut mounting & bearing LH As: FSM5194 |
|
SWP6806K | 1.5DCi, 1.6, 2.0DCi | Front top strut mounting & bearing RH As: FSM5195 |
|
SWP6917B | 1.5DCi, 1.6, 2.0DCi | Front top strut bearing LH &: RH As: FSM5234 |
|
SWP6918K | 2013→ | Front top strut mounting & bearing LH & RH As: FSM5431 |
|
SWP6838 | 1.5DCi, 1.6, 2.0DCi | Front subframe, front bush | |
SWP6839 | 1.5DCi, 1.6, 2.0DCi | Front subframe, rear bush | |
SWP2122K | 2.0dci | Sump plug & washer kit 16mm | |
SWP2122P | 2.0dci | Sump plug 16mm | |
SWP2122W | 2.0dci | Sump washer 16mm | |
SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP5982 | 1.5DCi, 1.6, 2.0DCi | Washer pump, single outlet | |
SWP6688 | 1.5DCi, 1.6, 2.0DCi | Wiring harness to suit SWP5982 washer pump | |
SWP6812 | 1.5DCi, 1.6, 2.0DCi | Washer pump, twin outlet As: ADN10313 |
|
SWP6688 | 1.5DCi, 1.6, 2.0DCi | Wiring harness to suit SWP6812 washer pump | |
SWP9730 | Various models: Check against sizes |
Propshaft Centre Bearing: 30mm ID 16mm wide |