Tel: 01633 - 256067
Part Number | Model | Description | Picture |
---|---|---|---|
SWP2332 | 1.4, 1.5dci, 1.6, 1.9dci, 2.0 | Front stabiliser link bar L&R | |
SWP12711C | 1.4, 1.6, 2.0 | Electronic coil pack [Coil on plugs] | |
SWP6221 | 1.4, 1.5dci, 1.6, 1.9dci, 2.0 | Twin outlet washer pump | |
SWP6688 | 1.4, 1.5dci, 1.6, 1.9dci, 2.0 | Wiring harness to suit SWP6221 washer pump | |
SWP6295 | 1.4 16v, 1.6 16v, 1.5dci, 1.9dci, 2.0 16v | Oil filler cap | |
SWP6296 | 1.5dci | Oil filler cap | |
SWP2122K | 2.0dci | Sump plug & washer kit 16mm | |
SWP2122P | 2.0dci | Sump plug 16mm | |
SWP2122W | 2.0dci | Sump washer 16mm | |
SWP6316 | 1.4 16v, 1.6 16v, 1.5dci, 1.9dci, 2.0 16v | Rear axle bush | |
SWP6668 | 1.4, 1.5DCI, 1.6, 1.9DCI, 2.0, 2.0DCI, 2.0 Sport | Lower ball joint L&R | |
SWP9521 | 1.9D | SPLINE between drive shaft & gearbox Length = 76.8mm SPLINES = 23 |
|
SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP435B/N | 1.4, 1.5dci, 1.6, 1.9dci, 2.0 | Pinch bolt & nut | |
SWP6765K | 1.4 16v, 1.6 16v, 1.5dci, 1.9dci, 2.0 16v | Front top strut mounting & bearing kit L&R Equivalent to FSM5083 |
|
SWP6773 | 1.9DCI, DTI Please check with measurements shown |
Total length from tip to toe = 568mm Length from bottom of “Pull” to tip of stick = 429mm Length from top groove to tip at bottom = 50mm |
|
SWP6782 | 1.4 16v, 1.6 16v, 1.5dci, 1.9dci, 2.0 16v | Front sub frame bush | |
SWP6810 | 1.4 16v, 1.6 16v, 1.5dci, 1.9dci, 2.0 16v Equivalent to Renault 8200729298 |
Heater blower harness Not for vehicles with climate control [Auto / Digital air con] |