Tel: 01633 - 256067
Part Number | Model | Description | Picture |
---|---|---|---|
SWP2347 | 1.4, 1.6, 1.6 16V, 1.6fsi, 1.8, 1.8t, 1.8t Gti, 1.9sdi, 1.9tdi, 2.0, 2.0 Bi-Fuel 2.3 V6, 2.8 V6 4 motion. Including Variant [Estate] 1J1 & 1J5 Models | Front stabiliser link bar L&R | |
SWP2516 | 1.4, 1.6, 1.6 16V, 1.6fsi, 1.8, 1.8t, 1.8t Gti, 1.9sdi, 1.9tdi, 2.0, 2.0 Bi-Fuel 2.3 V6 | Front stabiliser link bar L&R | |
SWP2496 | 1.8 4motion, 1.9tdi 4motion, 2.0 4motion, 2.3 4motion, 2.8 4motion, 3.2 R32 4motion saloon & estate | Front stabiliser link bar LH | |
SWP2497 | 1.8 4motion, 1.9tdi 4motion, 2.0 4motion, 2.3 4motion, 2.8 4motion, 3.2 R32 4motion saloon & estate | Front stabiliser link bar RH | |
SWP6660 | 1.4, 1.6, 1.6 16V, 1.6fsi, 1.8, 1.8t, 1.8t Gti, 1.9sdi, 1.9tdi, 2.0, 2.0 Bi-Fuel 2.3 V6, 2.8 V6 4 motion. Including Variant [Estate] 1J1 & 1J5 Models |
Front top strut mounting & bearing L&R | |
SWP5916 | 1.8, 2.0 Cabriolet only | Rear suspension, sub frame mounting Length = 90mm Inner Diameter = 12mm Outer Diameter = 56mm |
|
SWP5989 | 1.8, 2.0 Cabriolet only | Front wishbone, rear bush [Steel type] | |
SWP5989K | 1.8, 2.0 Cabriolet only | Front wishbone, rear bush & shim [Steel type] | |
SWP5992 | 1.8, 2.0 Cabriolet only | Front wishbone, rear bush [Aluminium type] | |
SWP5992K | 1.8, 2.0 Cabriolet only | Front wishbone, rear bush & shim [Aluminium type] | |
SWP17 | 1.8, 2.0 Cabriolet only | Front wishbone, rear bush shim to suit: SWP5989 or SWP5992 | |
SWP5963 | 3.2 R32 4 Motion | Front wishbone, rear bush | |
SWP5998 | 1.4, 1.6, 1.6 16V, 1.6fsi, 1.8, 1.8t, 1.8t Gti, 1.9sdi, 1.9tdi, 2.0,
2.0 Bi-Fuel 2.3 V6, 2.8 V6 4 motion. Including Variant [Estate]
1J1 & 1J5 Models |
Front anti roll bar bush 21mm | |
SWP6313K | 1.4, 1.6, 1.6 16V, 1.6fsi, 1.8, 1.8t, 1.8t Gti, 1.9sdi, 1.9tdi, 2.0, 2.0 Bi-Fuel 2.3 V6, 2.8 V6 4 motion, R32 4Motion Including Variant [Estate]
1J1 & 1J5 Models |
IMPROVED front anti roll bar bush & bracket kit With grooved bush & bracket 21mm | |
SWP5962 | 1.8, 2.0 Cabriolet only | Top strut mounting, front L&R | |
SWP5962B | 1.8, 2.0 Cabriolet only | Top strut bearing, front L&R | |
SWP5962K | 1.8, 2.0 Cabriolet only | Top strut mounting & bearing as a kit, front L&R | |
VSP | 1.8, 2.0 Cabriolet only | Sump plug & washer 19mm spanner size head | |
SWP128 | 1.4, 1.6, 1.6 16V, 1.6fsi, 1.8, 1.8t, 1.8t Gti, 1.9sdi, 1.9tdi, 2.0, 2.3 V6, 2.8 V6 4 motion, R32 3.2 4 motion. Including Variant [Estate] 1J1 & 1J5 Models | Oil filler cap | |
SWP46 | 1.9sdi, 1.9tdi | Diesel stop solenoid For Bosch EPVE pump | |
SWP12916C | 1.6, 1.8, 2.0 Cabriolet only | Ignition coil & module | |
SWP12727C | 1.4, 1.6, 1.6FSI | Ignition coil | |
SWP6229 | Cabriolet only | Single outlet washer pump | |
SWP6315 | 1.4, 1.6, 1.6 16V, 1.6fsi, 1.8, 1.8t, 1.8t Gti, 1.9sdi, 1.9tdi, 2.0, 2.3 V6, 2.8 V6 4 motion, R32 3.2 4 motion. Including Variant [Estate] J1 & 1J5 Models |
Twin outlet washer pump | |
SWP6693 | 1.4, 1.6, 1.6 16V, 1.6fsi, 1.8, 1.8t, 1.8t Gti, 1.9sdi, 1.9tdi, 2.0, 2.3 V6,
2.8 V6 4 motion, R32 3.2 4 motion. Including Variant [Estate] 1J1 & 1J5 Models |
Wiring harness to suit SWP6315 washer pump | |
SWP6271 | 1.4, 1.6, 1.6 16v, 1.6 fsi, 1.8, 1.8T, 1.8 T GTi, 1.9sdi, 1.9tdi, 2.0, 2.3 v5 Hatchback & Estate | Rear axle, hub carrier bush | |
SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6748 | Various models: Please check against photograph |
Under body heat shield [exhaust to floor] & noise insulations on bulk head [30mm OD] |