Tel: 01633 - 256067
Part Number | Model | Description | Picture |
---|---|---|---|
SWP1030 | 1.8T, 1.9TDi, 2.0, 2.8 7M6, 7M8, 7M9 Models |
Front stabiliser link bar L&R | |
VSP | 1.9tdi, 2.0, 2.8 | Sump plug & washer 19mm spanner size head | |
SWP128 | 1.8T, 1.9TDi, 2.0, 2.8 7M6, 7M8, 7M9 Models |
Oil filler cap | |
SWP46 | 1.9tdi | Diesel stop solenoid For Bosch EPVE pump | |
SWP5981K | 1.8T, 1.9TDi, 2.0, 2.8 77M6, 7M8, 7M9 MODELS | Top strut mounting & bearing, front L&R | |
DC48 | DOHC engine | Oil filler cap | |
SWP12916C | 2.0, 2.8 | Ignition coil & module | |
SWP6230 | 1.8T, 1.9TDi, 2.0, 2.8 7M6, 7M8, 7M9 MODELS | Twin outlet washer pump | |
SWP6710 | 1.8T, 1.9TDi, 2.0, 2.8 7M6, 7M8, 7M9 MODELS | Wiring harness to suit SWP6230 washer pump | |
SWP6315 | 1.8, 1.9tdi, 1.9tdi 4motion, 2.0, 2.8, 2.8 4motion, 2.8vr6, 2.8 vr6 syncro | Twin outlet washer pump | |
SWP6693 | 1.8, 1.9tdi, 1.9tdi 4motion, 2.0, 2.8, 2.8 4motion, 2.8vr6, 2.8 vr6 syncro | Wiring harness to suit SWP6315 washer pump | |
SWP9519 | 1.8T, 1.9TDi, 1.9TDi 4motion, 2.0, 2.0TDi, 2.8 v6, 2.8 v6 4motion | Inner pod joint “Flower pot” style Seal diameter = 123mm Internal splines on Tri-pod = 34 |
|
SWP8014 | 1.9TDi, 2.0i, 2.8v6 Excludes 1.9d 90BHP Model | O/S Inner intermediate shaft: Long shaft has 26 male splines. Small stub has 26 female splines & 37 male splines. Seal diameter is 33.4mm |
|
SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe | |
SWP543 | Various models: Please check against sizes shown |
“Windows” ABS Ring 48 Teeth 78.8mm Inner Diameter 13mm Wide | |
SWP6748 | Various models: Please check against photograph |
Under body heat shield [exhaust to floor] & noise insulations on bulk head [30mm OD] |