Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP2081 | 1.4, 1.4hdi, 1.6, 1.6hdi, 2.0, 2.0hdi 90, 110 & 135 | Front stabiliser link bar L&R |
|
| SWP5934 | 1.4, 1.4hdi, 1.6, 1.6hdi, 2.0, 2.0hdi 90, 110 & 135 | Front wishbone, rear bush |
![]() |
| SWP5924 | 2.0, 2.0HDi | Engine mounting LH |
![]() |
| SWP5982 | All models without rear wash | Direct fit single outlet windscreen washer pump |
![]() |
| SWP6688 | All models without rear wash | Wiring harness to suit SWP5982 washer pump |
![]() |
| SWP5983 | All models with rear wash | Direct fit twin outlet windscreen washer pump |
![]() |
| SWP6688 | All models with rear wash | Wiring harness to suit SWP5983 washer pump |
![]() |
| SWP417B/N | All models | Pinch bolt & nut for ball joint on wishbone |
|
| SWP12719C | 1.4 | Electronic coil pack without module [Coil on plugs] |
![]() |
| SWP12720C | 1.4 | Electronic coil pack with module [Coil on plugs] |
![]() |
| SWP6299 | HDi engine | Oil filler cap |
![]() |
| SWP6310 | HDi engine | Engine cover cap 4 per car |
![]() |
| SWP6311 | HDi engine | Engine cover peg / stud 4 per car |
![]() |
| SWP2122K | Choice of 14mm or 16mm threads | Sump plug & washer kit 16mm |
![]() |
| SWP2122P | Choice of 14mm or 16mm threads | Sump plug 16mm |
![]() |
| SWP2122W | Choice of 14mm or 16mm threads | Sump washer 16mm |
![]() |
| SWP2123K | Choice of 14mm or 16mm threads | Sump plug & washer kit 14mm |
![]() |
| SWP2123P | Choice of 14mm or 16mm threads | Sump plug 14mm |
![]() |
| SWP2123W | Choice of 14mm or 16mm threads | Sump washer 14mm |
![]() |
| SWP6326 | 1.4, 1.4hdi, 1.6, 1.6hdi, 2.0, 2.0hdi | Rear axle bush |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |
| SWP6703 | 1.4, 1.4hdi, 1.6, 1.6hdi, 2.0, 2.0hdi 90, 110 & 135 | Inner drive shaft joint spring |
|
| SWP6771 | AS OE: 1174.75 | Total length from tip to toe = 560mm Length from bottom of “Pull” to tip of stick = 470mm Length of yellow tip at bottom = 55mm |
|
| SWP6774 | AS OE: 1174.85 | Total length from tip to toe = 529mm Length from bottom of “Pull” to tip of stick = 495mm Length from top groove to tip at bottom = 50mm |
|
| SWP6776 | For 22mm anti roll bar Equivalent to: FSK6260 |
Front anti roll bar bush |
![]() |
| SWP6777 | For 21mm anti roll bar Equivalent to: FSK6259 |
Front anti roll bar bush | ![]() |
| SWP6778 | For 23mm anti roll bar Equivalent to: FSK7209 |
Front anti roll bar bush | ![]() |