Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP2444 | 1.6 16v, 1.9dci, 2001→ | Front stabiliser link bar L&R |
|
| SWP5770 | 1.2, 1.4, 1.5dci, 1.9, 1.9dti | Front stabiliser link bar L&R |
![]() |
| SWP6789K | 1.2, 1.4, 1.5dci, 1.9, 1.9dti | Front top strut mounting & bearing kit L&R |
![]() |
| SWP5920 | 1.2, 1.4, 1.5dci, 1.9, 1.9dti | Engine mounting, rear |
|
| SWP5999 | 1.2, 1.4, 1.5dci, 1.9, 1.9dti | Front wishbone, lower bush |
![]() |
| SWP12711C | 1.6, 1.6 16v | Electronic coil pack [Coil on plugs] |
|
| SWP6227 | 1.2, 1.4, 1.5dci, 1.9, 1.9dti, |
Twin outlet washer pump
Connection = Long oval block with two, 3.5mm wide parallel pin terminals, as per picture. |
![]() |
| SWP6691 | 1.2, 1.4, 1.5dci, 1.9, 1.9dti, | Wiring harness to suit SWP6227 washer pump |
![]() |
| SWP6257 | 1.2, 1.4, 1.5dci, 1.9, 1.9dti, |
Twin outlet washer pump
Connection = Small rectangular block with two, 2mm wide parallel pin terminals |
![]() ![]() |
| SWP6688 | 1.2, 1.4, 1.5dci, 1.9, 1.9dti, | Wiring harness to suit SWP6257 |
![]() |
| SWP6221 | 1.2, 1.4, 1.5dci, 1.9, 1.9dti | Twin outlet washer pump
[Non impellor type] |
![]() |
| SWP6688 | 1.2, 1.4, 1.5dci, 1.9, 1.9dti, | Wiring harness to suit SWP6221 |
![]() |
| SWP6295 | 1.2, 1.4, 1.6v | Oil filler cap |
![]() |
| SWP6296 | 1.5dci, 1.9D | Oil filler cap |
![]() |
| SWP2122K | 1.2, 1.4, 1.9 | Sump plug & washer kit 16mm |
![]() |
| SWP2122P | 1.2, 1.4, 1.9 | Sump plug 16mm |
![]() |
| SWP2122W | 1.2, 1.4, 1.9 | Sump washer 16mm |
![]() |
| SWP6333 | 1.2. 1.5Dci | Rear engine mounting |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |
| SWP9207 | 1.9DCi 4x4 | Propshaft centre bearing [2 per prop] | ![]() |
| SWP537 | Various models: Please check against sizes shown |
ABS Ring 44 Teeth 74.8mm Inner Diameter 8mm Wide | ![]() |
| SWP538 | Various models: Please check against sizes shown |
ABS Ring 26 Teeth 74.8mm Inner Diameter 8mm Wide | ![]() |
| SWP435B/N | 1.2, 1.4, 1.5dci, 1.9, 1.9dti | Pinch bolt & nut | ![]() |
| SWP6773 | 1.9DCI, DTI Please check with measurements shown |
Total length from tip to toe = 568mm Length from bottom of “Pull” to tip of stick = 429mm Length from top groove to tip at bottom = 50mm |
![]() |