Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP5998 | 1.4, 1.6, 1.8, 1.9sdi, 1.9TDI, 2.8 Cupra 4 | Front anti roll bar bush 21mm |
![]() |
| SWP2347 | 1.4, 1.6, 1.8, 1.9sdi, 1.9TDI, 2.8 Cupra 4 | Front stabiliser link bar L&R |
|
| SWP2516 | 1.4, 1.6, 1.8, 1.9sdi, 1.9TDI, 2.8 Cupra 4 | Front stabiliser link bar L&R |
|
| SWP2496 | 1.4, 1.6, 1.6 16v, 1.8 20v, 1.8 T4, 1.9TDI, 2.8 CUPRA 4 | Front stabiliser link bar LH |
|
| SWP2497 | 1.4, 1.6, 1.6 16v, 1.8 20v, 1.8 T4, 1.9TDI, 2.8 CUPRA 4 | Front stabiliser link bar RH |
|
| SWP6660 | 1.4, 1.6, 1.6 16v, 1.8 20v, 1.8 T4, 1.9TDI, 2.8 CUPRA 4 | Front top strut mounting & bearing L&R |
![]() |
| SWP128 | 1.4, 1.6, 1.8, 1.9sdi, 1.9TDI | Oil filler cap |
![]() |
| SWP46 | 1.9tdi | Diesel stop solenoid For Bosch EPVE pump |
|
| SWP12727C | 1.4, 1.6 16v | Ignition coil |
![]() |
| SWP5963 | 1.8T Cupra R 2002→ | Front wishbone bush |
![]() |
| SWP6271 | 1.4 16v, 1.6, 1.6 16v, 1.8 20v, 1.8 20v T, 1.8T Cupra R 210 & 225BHP, 1.9SDi, 1.9TDi, 2.0 FSi, 2.0 TFSi, 2.0 TDi 16v | Rear axle, hub carrier bush |
![]() |
| SWP6315 | 1.4 16v, 1.6, 1.6 16v, 1.8 20v, 1.8 20v T, 1.8T Cupra R 210 & 225BHP, 1.9SDi, 1.9TDi, 2.0 FSi, 2.0 TFSi, 2.0 TDi 16v | Twin outlet washer pump |
![]() |
| SWP6693 | 1.4 16v, 1.6, 1.6 16v, 1.8 20v, 1.8 20v T, 1.8T Cupra R 210 & 225BHP, 1.9SDi, 1.9TDi, 2.0 FSi, 2.0 TFSi, 2.0 TDi 16v | Wiring harness to suit SWP6315 washer pump |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |