Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP5986 | 1.2, 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI | Washer pump, double outlet |
![]() |
| SWP6710 | 1.2, 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI | Wiring harness to suit SWP5986 washer pump | ![]() |
| VDSP | 1.7DTI, 1.7CDTI | Sump plug & washer 22mm spanner size head |
![]() |
| SWP2126 | 1.2, 1.4, 1.6, 1.8, 2.0 | Sump plug & rubber seal Round head with Torx 45 |
![]() |
| SWP2130K | 1.9cdti | Sump plug & washer |
![]() |
| SWP1025 | 1.2, 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI For vehicles without electronic drive dynamics control | Front stabiliser link bar L&R Metal |
|
| SWP1025P | 1.2, 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI For vehicles without electronic drive dynamics control | Front stabiliser link bar L&R Plastic |
|
| SWP6021 | 1.2, 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI | Front hub, grease cap |
![]() |
| SWP6018 | 1.2, 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI |
Front hub, grease cap
57mm diameter |
![]() |
| SWP6306 | 1.2, 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI | Oil filler cap As: 90412508 |
![]() |
| SWP6307 | Z18XE | Oil filler cap
As: 90536291 |
![]() |
| SWP6317 | 1.2, 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI | Handbrake cable clip |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |
| SWP6708 | 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI | Front top strut mounting & bearing L&R |
![]() |
| SWP6755 | 1.4, 1.6, 1.8, 2.0, 1.7DTI, 1.7CDTI | Rear axle bush |
![]() |