Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP2352 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Front stabiliser link bar L&R |
|
| SWP2517 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Rear stabiliser link bar L&R |
![]() |
| SWP6781K | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Front top strut mounting & bearing L&R Equivalent to FSM5189 |
![]() |
| SWP51 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Temperature sensor, exterior. Also known as an ambier sensor |
![]() |
| SWP5986 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Washer pump, double outlet |
![]() |
| SWP6710 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Wiring harness to suit SWP5986 washer pump |
![]() |
| SWP2126 | 1.8, 3.2, 2.0DTi, 2.2DTi | Sump plug & rubber seal Round head with Torx 45 |
![]() |
| SWP2130K | 1.9cdti | Sump plug & washer |
![]() |
| SWP6010 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Rear suspension damper bush 70mm OD |
![]() |
| SWP6011 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Rear suspension damper bush 45.5mm OD |
![]() |
| SWP6024 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 |
Rear suspension arm. Note: Old Vectra, Peugeot 406, BMW E36 Rose joints won’t fit this. |
![]() |
| SWP6015 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 |
Front anti roll bar bush to suit 24mm anti roll bar 2 Bumps on front of bush |
![]() |
| SWP6016 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 |
Front anti roll bar bush to suit 24.2mm anti roll bar 3 Bumps on front of bush |
![]() |
| SWP6017 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 |
Front anti roll bar bush to suit 25.2mm anti roll bar
No Bumps on front of bush |
![]() |
| SWP6678 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Rear anti roll bar bush 17mm |
![]() |
| SWP6018 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 |
Front hub, grease cap
57mm diameter |
![]() |
| HN24K | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Front hub, grease cap & nut 57mm diameter cap |
![]() |
| SWP6020 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Front wishbone, rear bush |
![]() |
| SWP6034 |
1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2
- Chassis No 58999999 + 51999999 |
Front sub frame bush [Shorter type]
2 per car |
![]() |
| SWP6035 |
1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2
- Chassis No 58999999 + 51999999 |
Front sub frame bush [Longer type]
2 per car |
![]() |
| SWP6032 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2
Chassis No 61000001 Onwards |
Front sub frame bush [Longer type]
2 per car |
![]() |
| SWP6033 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2
Chassis No 61000001 Onwards |
Front sub frame bush [Shorter type]
2 per car |
![]() |
| SWP12724C | 1.8 16v | Coil pack |
![]() |
| SWP6306 | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, | Oil filler cap |
![]() |
| SWP419B/N | 1.8, 1.9CDTi, 2.0DTi, 2.0, 2.2DTi, 3.0CDTi, 3.2 | Front wishbone pinch bolt & nut |
|
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |