Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| DSB105 | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Front stabiliser link bar L&R |
|
| SWP118 | 1.8, 2.0, 2.0sri 130 Excluding GSI & 4X4 | Fuel injection pump mounting |
|
| 1300VHB | 1.3 | Cylinder head stretch bolts Size = M10 Length = 140mm |
![]() |
| 1600VHB | 1.6, 1.8, 2.0 | Cylinder head stretch bolts Size = M11 Length = 140mm |
![]() |
| VHBD | 1.6 Diesel | Cylinder head stretch bolts Size = M11 Length = 154mm |
![]() |
| SWP16 | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Axle bush, rear Steel casing |
![]() |
| SWP5885 | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Axle bush, rear Plastic casing |
![]() |
| DC42 | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Oil filler cap |
![]() |
| WP138 | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Header tank cap |
![]() |
| VSP | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Sump plug & washer 19mm spanner size head |
![]() |
| SWP74 | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Wiper interval relay, front |
![]() |
| SWP75 | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Fuel injection pump relay |
![]() |
| SWPH1 | 1.8, 2.0 | Crankcase breather hose |
![]() |
| SWP52 | 1.6, 1.8, 2.0, 2.0sri 130 | Oil filter gauze, upper cover, camshaft case. |
![]() |
| SWP177 |
1.3, 1.6, 1.6D,1.8, 2.0 Manual transmission |
Engine mounting, rear LH |
![]() |
| SWP139 | 1.3, 1.6SV | Evaporation filter, fuel tank to suit Pierburg carburettor type |
![]() |
| VWP | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Washer pump, single outlet |
|
| DC100 | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Complete pedal rubber set |
![]() |
| VBSCK | 1.3, 1.6, 1.6d, 1.8, 2.0, 2.0sri 130 | Front brake slide calliper kit for Delco Moraine system |
![]() |
| SWP6209 | 1.6i, 1.6i CAT |
Lambda sensor
[Direct fit]
1 Wire |
![]() |
| SWP6317 | 1.6D | Handbrake cable clip |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |