Tel: 01633 - 256067
| Part Number | Model | Description | Picture |
|---|---|---|---|
| SWP2374 | 1.3cdti, 1.4, 1.8 | Front stabiliser link bar L&R |
|
| SWP91 | 1.4, 1.8 | Strut mounting, front top L&R |
![]() |
| SWP6899 | 1.3cdti, 1.4, 1.8 | Front wishbone, rear bush As: FSK7646 |
![]() |
| SWP51 | 1.3cdti, 1.4, 1.8 | Temperature sensor, exterior. Also known as an ambier sensor |
![]() |
| SWP5985 | 1.3cdti, 1.4, 1.8 | Washer pump, single outlet |
|
| SWP6710 | 1.3cdti, 1.4, 1.8 | Wiring harness to suit SWP5986 washer pump | ![]() |
| SWP193 | 1.3cdti, 1.4, 1.8 | Front anti roll bar bush 18mm |
![]() |
| SWP2126 | 1.3cdti, 1.4, 1.8 | Sump plug & rubber seal Round head with Torx 45 |
![]() |
| SWP6022 | 1.3cdti, 1.4, 1.8 | Rear hub, grease cap |
![]() |
| HN25K | 1.3cdti, 1.4, 1.8 | Rear hub, grease cap & nut |
![]() |
| SWP6021 | 1.3cdti, 1.4, 1.8 | Front hub, grease cap |
![]() |
| HN26K | 1.3cdti, 1.4, 1.8 | Front hub, grease cap & nut |
![]() |
| SWP6023 | 1.3cdti, 1.4, 1.8 | Modified gear selector mechanism [with steel plate] |
![]() |
| SWP6255 | 1.0, 1.2, 1.2 Dual fuel, 1.4, 1.8, 1.3cdti, 1.7di, 1.7dti, 1.7cdti, 1.8 16v | One way spring loaded clip that should be replaced when changing the above item [Gear linkage selector mechanism] As the old one will be destroyed once removed. As: 90523189 |
![]() |
| SWP6324 | 1.3cdti, 1.4, 1.8 | COMPLETE gear selector mechanism including spring loaded clip |
![]() |
| SWP6324A | 1.0, 1.2, 1.2 Dual fuel, 1.4, 1.8, 1.3cdti, 1.7di, 1.7dti, 1.7cdti, 1.8 16v | Gear mechanism main arm only |
![]() |
| SWP6036 | 1.3cdti, 1.4, 1.8 | Gear linkage repair kit to suit SWP6023 & SWP6324 |
![]() |
| SWP12724C | 1.8 | Coil pack |
![]() |
| SWP6246 | 1.3cdti, 1.4, 1.8 | Front axle, idler arm mounting |
![]() |
| SWP6307 | Z18XE | Oil filler cap |
![]() |
| SWP6317 | 1.3cdti, 1.4, 1.8 | Handbrake cable clip |
![]() |
| SWP6671 | 1.3CDTi, 1.4 | Outer CV boot kit |
![]() |
| SWP5958 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6345 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
|
| SWP6346 | Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle | Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
![]() |
| SWP6718 | 1.3cdti, 1.4, 1.8 | Indicator & Dip beam stalk![]() |
![]() |
| SWP544 | Various models: Please check against sizes shown |
ABS Ring 29 Teeth 66.9mm Inner Diameter 11.5mm Wide | ![]() |
| SWP6768 | Various models: | Rear magnetic ABS ring |
![]() |