| Part Number |
Model |
Description |
Picture |
| SWP2462 |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI |
Front stabiliser link bar L&R |
 |
| SWP2618 |
1.5, 2.0 2015→ |
Front stabiliser link bar L&R Equivalent to:FDL7488 |
 |
| SWP2533 |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Rear stabiliser link bar L&R |
 |
| SWP6731 |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Front top strut bearing L&R |
 |
| SWP6731M |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Front top strut mounting L&R |
 |
| SWP6731K |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Front top strut mounting & bearing L&R |
 |
| SWP6895K |
2015→ |
Front top strut mounting kit L&R |
|
| SWP428K |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI |
Mass flywheel bolt kit |
 |
| SWP2124K |
2.0 petrol |
Sump plug with rubber seal |
 |
| SWP2124W |
2.0 petrol |
Rubber seal for sump plug |
 |
| SWP6673K |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Rear suspension arm bush kit 2 x kits needed per vehicle As below SWP6896 |
 |
| SWP6896 |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Rear lower suspension arm As: FCA7155 |
 |
| SWP439B/N |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI, 2.3 |
Rear lower suspension arm Camber bolt & nut
As: 1117876 |
 |
| SWP6674LH |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI |
Rear trailing arm T Bush & Bracket LEFT HAND |
 |
| SWP6674RH |
2.0, 2.3, 1.8TDCI, 2.0TDCI, 2.2TDCI |
Rear trailing arm T Bush & Bracket RIGHT HAND |
 |
SWP6674L&R
LOCATED
|
Arm that SWP6674L&R fits into |
Click on picture to enlarge |
 |
| SWP5958 |
Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle |
Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe
|
 |
| SWP6345 |
Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle |
Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
 |
| SWP6346 |
Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle |
Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
 |
| SWP6204 |
2.0, 1.8tdci, 2.0tdci |
Twin outlet washer pump. [Parallel pins, oval socket] |
 |
| SWP6712 |
2.0, 1.8tdci, 2.0tdci |
Wiring harness to suit SWP6204 washer pump |
 |
| SWP6282T |
1.8TDCi |
Top thermostat housing water outlet connection |
 |
| SWP6282B |
1.8TDCi |
Bottom thermostat housing water outlet connection & Lower thermostat seal |
 |
| SWP6746 |
2.0 DURATEC 2.3 DOHC EFi As: 1135010 |
Oil filler cap |
 |