| Part Number |
Model |
Description |
Picture |
| SWP50 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i |
Front stabiliser link bar L&R Steel |
 |
| SWP44AL |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i |
Front stabiliser link bar L&R Aluminium |
 |
| SWP2310 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i 1998 to 2000 |
Rear stabiliser link bar assembly kit L&R |
 |
| SWP89 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i Up to October 1994 (excluding estate) |
Rear stabiliser link bar L&R |
 |
| SWP90 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i From November 1994 on (excluding estate) |
Rear stabiliser link bar L&R |
 |
| SWP499 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i |
Repair kit for SWP89 & SWP90. Pictured above |
 |
| SWP70 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i |
Rear suspension, lower trailing arm |
 |
| SWP401/2 |
1.6i, 1.8i, 1.8td, 2.0i |
Wishbone shank bolt & nut |
 |
| SWP405/6 |
1.6i, 1.8i, 1.8td, 2.0i |
Wishbone pinch bolt & nut |
 |
| SWP107F |
1.6i, 1.8i, 1.8td, 2.0i 48mm |
Wishbone bush, front |
 |
| SWP108R |
1.6i, 1.8i, 1.8td, 2.0i |
Wishbone bush, rear |
 |
| SWP146 |
1.6i, 1.8i, 1.8td, 2.0i Originally for 1996 on
vehicles but most will now have aftermarket wishbones fitted |
Wishbone bush, rear |
 |
| SWP5904 |
1.6i, 1.8i, 1.8td, 2.0i
Originally for 1996 on vehicles but most will now have
aftermarket wishbones fitted 54mm |
Wishbone bush, front |
 |
| SWP57 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i |
Anti roll bar bush, front 20mm |
 |
| SWP5660 |
1.8d, 2.5 Durotec |
Anti roll bar bush, rear 18mm |
 |
| SWP5661 |
All 16 valve engines |
Anti roll bar bush, rear 16mm |
 |
| SWP112 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i |
Brake calliper guide kit. [Eliminates brake shudder] |
 |
| SWP2124K |
1.6i, 1.8i, 2.0i Zetec engine |
Sump plug & rubber seal |
 |
| SWP2124W |
1.6i, 1.8i, 2.0i Zetec engine |
Rubber seal for sump plug |
 |
| SWP2125K |
1.8d, 1.8td Endura engine |
Sump plug & washer |
 |
| SWP2127K |
2.5 Only |
Sump plug & rubber seal |
 |
| SWP2183 |
1.8 diesel only |
Oil filler cap |
 |
| SWP6746 |
1.8 DURATEC With plastic rocker cover 92 – 96 96 - 00
As: 1135010 |
Oil filler cap |
 |
| SWP47 |
1.8td |
Diesel stop solenoid For Delphi / Lucas equipment |
 |
| SWP2310 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i
1998 to 2000
|
Rear stabiliser link bar assembly kit L&R |
 |
| CPR7 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i |
Clutch pawl repair kit, automatic adjustment |
 |
| SWP58 |
All models up to 1996 |
Side repeater lens, AMBER |
 |
| SWP165 |
All facelift models from 96-00 |
Side repeater lens, AMBER |
 |
| SWP69 |
All models from 93-2000 |
Bulb holder to suit side indicator lens |
 |
| SWP6225 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i
1998 to 2000
|
Windscreen washer pump, single outlet |
 |
| SWP6689 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i
1998 to 2000
|
Wiring harness to suit SWP6225 washer pump |
 |
| FWP3 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i |
Washer pump, twin outlet |
 |
| SWP6689 |
All models from 93-2000 |
Wiring harness to suit FWP3 washer pump |
 |
| SWP12614C |
1.6, 1.8, 2.0 |
Electronic coil for Distributorless ignition |
 |
| SWP1116 |
ZETEC only |
Thermostat housing
METAL |
 |
| SWP6281 |
ZETEC only |
Top thermostat housing
PLASTIC |
 |
| SWP13 |
1.6i, 1.8i, 1.8td, 2.0i |
Exhaust manifold bolt / pin |
 |
| SWP507 |
All models |
Emission control valve filter |
 |
| SWP6219 |
ESTATE MODELS ONLY |
Rear trailing arm bush |
 |
| SWP6670 |
SALOON & HATCHBACK ONLY |
Rear trailing arm axle bush L&R See photo below for position on vehicle |
 |
| SWP6670 Located |
Location of bush on vehicle |
Click on picture to enlarge |
 |
| SWP5958 |
Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle |
Diesel hand primer pump, In-line An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe
|
 |
| SWP6345 |
Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle |
Diesel hand primer pump. One straight end, one 90º end An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
 |
| SWP6346 |
Various Diesel models. Please choose what best suits your vehicle between In-line, One straight end, one 90º end, Both ends at 90º angle |
Diesel hand primer pump. Both ends at 90º angle. An arrow shows direction of fuel flow. Pump has a non return valve at one end. Both ends are to suit 8mm fuel pipe |
 |
| SWP566 |
Various models: Please check against sizes shown |
ABS Ring 44 Teeth 81.8mm Inner Diameter 13mm Wide |
 |
| SWP6726 |
1.6i, 1.8i, 1.8td, 2.0i, 2.5i |
Driveshaft seal |
 |
| SWP6748 |
Various models: Please check against photograph |
Under body heat shield [exhaust to floor] & noise insulations on bulk head [30mm OD] |
 |
| SWP807 |
RHD Manual models from 96 - 00 |
Pedal rubber set [Clutch & brake]As: 6789917 |
 |